Clarity WN-5040-720 manual Safety with high or tilted walls

end of the row has shorter side-to-side bolts to secure just two Margays together.

5. Check straightness of this second row.

6.Continue in this way with the rest of the rows, checking straightness as you go.

CAUTION

For high walls, over 2 units high, and for all tilted walls, see the safety instruction below.

Safety with high or tilted walls

Because the Margay is so narrow front to back, there is a danger of tipping with high walls. Margay has tie-back points on the rear to prevent this.

Use these tie-backs to secure the Margay wall to a structural part of the building. Don’t wait until the wall is finished. Do this as you build the wall up.

If the wall is tilted forward, tie the Margay all the way up.

The tie-back points are ¼”x20 threaded holes.

Make sure the fronts of the units are flush with each other. This will make screen alignment easier.

17