Chapter 12. Camera Section In-Depth

1. CAMERA SETTING GUI

Chapter 12. Camera Section In-Depth

In This section we will be covering Camera section, where there are controls for adjusting property, naming, PTZ, and viewing aspects of the Camera.

1. CAMERA SETTING GUI

Camera Settings GUI has option to control Covert, AGC, Static Gain, Brightness, Contrast and Hue.

Figure 100 Camera Setting GUI

Covert: Controls the camera to be displayed on the Live view or not. As long as camera is chosen on the “CH” section it will conduct the recording even if you choose to have it chosen to covert.

AGC: AGC is short for Automatic Gain Control. It will determine the best possible gain option for the camera to show proper signal gain. Gain control is needed for those cameras that are installed far away. They often times loose signal strength and with Gain control you may improve the signal strength. AGC will try to detect the level of the signal and try to compensate internally.

Static Gain: Static Gain option only gets enabled if you do not choose to use the AGC feature. Unlike the automatic gain the static gain control enables the option to increase and decrease the gain by user intervention. Use this option if you need to fine tune the camera’s gain to desire output.

Page

122

Page 122
Image 122
Clover Electronics DV1670D instruction manual Camera Section In-Depth, Camera Setting GUI