Chapter 9. Systems Section In-Depth

4. UPGRADE GUI

4. UPGRADE GUI

In this section of GUI page, you will need to introduce the USB media with valid firmware update file and this GUI will show file name similar to Figure 69 UPGRAD GUI.

Figure 69 UPGRAD GUI

Save the firmware to the USB Memory Stick and insert it into the USB port of a DVR. Then the file list stored in the memory stick is displayed. Select the relevant firmware file and click the Upgrade tap.

Figure 70 Firmware to USB memory

It may take a minute or a minute & 30 seconds depending on the firmware. Please wait until rebooting is finished. Do not unplug or take out the USB memory stick during the upgrade. Otherwise, it could be the cause of the product failure.

Page 83

Page 83
Image 83
Clover Electronics DV1670D instruction manual Upgrade GUI, Upgrad GUI