Chapter 14. Event Section
3. MOTION DETECTION GUI
Range: Set the area where a motion would be detected.
There are also indications in pink color when motion is detected. It also serves as feedback on your sensitivity settings. If you see the pink color in the grid you choose for motion then such motion activity is sensitive enough to be detected. Please use trial and error to configure it just right.
Set the area by using the direction key(or mouse dragging) and press “Enter”.
•Select the area where the motion is detected : The selected area is outlined with blue.
•Cancel the area where the motion is detected : No signal
•The area where the motion would be detected is marked with red.
☞Note : You can use the hot key to set all areas.
•No. “1” : Select all
•No. “2” : Cancel all
Page |
142 |
