Chapter 2. Hardware Description
3.Rear Port Specification and Connection Examples
Figure 20 Ethernet Cable Color Code
EIA/TIA E568B Configuration
Signal Type | Pin Number | Description |
LAN Tx+ | 1 | Ethernet Transmit Positive |
LAN Tx- | 2 | Ethernet Transmit Negative |
LAN Rx+ | 3 | Ethernet Receive Positive |
Not Used | 4 | Not Used |
Not Used | 5 | Not Used |
LAN Rx- | 6 | Ethernet Receive Negative |
Not Used | 7 | Not Used |
Not Used | 8 | Not Used |
|
|
|
| Figure 21 Ethernet Pin Configuration |
|
Example 1. Direct connection using cross over cable
This type of connection is used mostly for testing the DVR unit and for simple and short cable connection. Since there is no devices providing DHCP services you must fix your IP address to static IP address (discussed on Chapter Chapter 11. Network Section
Page 33
