2-10Setup and Configuration

Modem result code options

Chapter 6 explains modem command strings in more detail. Chapter 8 provides additional information on using the modem in shared mode. Appendix A contains suggested entries for proper initialization strings for several common modems.

2.Set Dial Prefix to either ATDT (tone - default) or ATDP (pulse) dialing.

3.The Answer String should contain the command string necessary to place the modem in “auto-answer” mode. It will not accept calls if this string is not set appropriately.

The default string, ATS0=1 places a Hayes-compatible modem in auto- answer mode, answering on the first ring.

Assigning Authorized Users

Before any users can log into IRC, the system administrator must set up a valid user database. This is also performed through the System Configuration Utility.

Figure 2-6. Example: Configuring users

Page 24
Image 24
Compaq 281862-002 manual Assigning Authorized Users, 10Setup and Configuration