Compaq 281862-002 manual Key Functions for Navigating the IRC Menu System

4-6Using Integrated Remote Console

	Table 4-1
Key Functions for Navigating the IRC Menu System
Key	Function
1-9	Moves and selects the corresponding menu item
− or I	Scrolls the highlighted selection up. The “I” key can be used to
	navigate the menus from ANSI terminal programs that do not support
	the up and down arrow keys.
↓ or M	Scrolls the highlighted selection down. The “M” key can be used to
	navigate the menus from ANSI terminal programs that do not support
	the up and down arrow keys.
Tab	Moves to the next selection.
[Atn] Esc	Exits the Remote Console session. This is a two-key sequence
	performed by first pressing the user-definable attention key and then
	pressing the Esc key. See Chapter 5 for more information on entering
	attention key sequences.
Enter	Displays the next level menu, detail information for a selected item, or
	terminates editing and accepts changes.
Esc	Cancels the current event and returns to the previous screen. A
	confirmation message is displayed to verify that you have saved any
	changes.
Page Up or O	Displays the previous page.
Page Down or ,	Displays the next page.
(comma)
Space	Toggles between two options.
Home or U	Returns to the top.
End or N	Moves to the bottom.

If your terminal emulator does not support the arrow keys, you can still generate these keys by using attention key sequences (described in detail in Chapter 5). The attention key sequence for generating the up and down arrow keys in Remote Console mode is [Atn]I and [Atn]M respectively. For this example, the attention key method is used to move the selector to the “MS- DOS” entry.