2-4 Drive Installation
IMPORTANT: Do not use SCSI ID = 7. This is reserved for SCSI controllers.
Table
Selecting the SCSI ID
SEL2 | SEL1 | SEL0 | SCSI ID |
OPEN | OPEN | OPEN | 0 |
|
|
|
|
OPEN | OPEN | CLOSED | 1 |
|
|
|
|
OPEN | CLOSED | OPEN | 2 |
|
|
|
|
OPEN | CLOSED | CLOSED | 3 |
|
|
|
|
CLOSED | OPEN | OPEN | 4 |
|
|
|
|
CLOSED | OPEN | CLOSED | 5 |
|
|
|
|
CLOSED | CLOSED | OPEN | 6 |
|
|
|
|
CLOSED | CLOSED | CLOSED | 7 |
|
|
|
|
NOTE: In the above table, “CLOSED” indicates that a jumper has been installed.
Installing the Drive
Refer to the documentation supplied with your system for specific instructions on obtaining access to the removable media bay where you intend to install your drive.
WARNING: : To reduce the risk of electric shock or damage to the equipment, disconnect power from the server by unplugging all power cords from either the electrical outlet or the server.
Compaq SLR Tape Drive User Guide
