Compaq 340622-002 manual SCO OpenServer, 8Installing the Software Drivers

3-8Installing the Software Drivers

SCO OpenServer

The drivers required to support the Compaq SLR Drive under SCO UNIX are:

■The SCO SCSI tape driver stp which is built into SCO OpenServer; see the SCO System Administrator's Guide for information on how to configure the driver

■An appropriate SCSI controller driver

The following table provides information on identifying appropriate drivers for Compaq SCSI controllers:

	Table 3-4
	SCO UnixWare
Controller	Software Driver Information
32-Bit Fast-SCSI-2 Controller	Refer to the appropriate README on the

or 32-Bit Fast-Wide SCSI-2 Controller

Compaq Support Software CD.

or Wide-Ultra SCSI Controller

The name of the driver is cha.

In addition, the appropriate version of the Compaq Extended Feature Supplement (EFS) for SCO UnixWare is required:

■For SCO Open Server 3, use Compaq EFS version 3.16 or later

■For SCO OpenServer 5, use Compaq EFS version 5.16 or later

EFS for SCO OpenServer is available on both the Compaq SmartStart and Support Software CD and on Compaq SmartStart CD and is installed and configured automatically during a SmartStart installation.

IMPORTANT: See Appendix C, “Drive Configuration Changes” for information on configuring the SCSI ID for SCO OpenServer.

Compaq SLR Tape Drive User Guide