Manuals / D-Link / Computer Equipment / Switch

D-Link DES-3226 manual Unpacking and Setup, Desktop or Shelf Installation

Models: DES-3226

1 179

Download 179 pages 59.28 Kb

Page 15

DES-3226 NWay Standalone Fast Ethernet Switch User’s Guide

2

UNPACKING AND SETUP

This chapter provides unpacking and setup information for the Switch.

Unpacking

Open the shipping carton of the Switch and carefully unpack its contents. The carton should contain the following items:

•One DES-3226 24-Port NWay Standalone Fast Ethernet Switch

•Mounting kit: 2 mounting brackets and screws

•Four rubber feet with adhesive backing

•One AC power cord

•This User’s Guide with Registration Card

If any item is found missing or damaged, please contact your local reseller for replacement.

Installation

Use the following guidelines when choosing a place to install the Switch:

•The surface must support at least 3 kg.

•The power outlet should be within 1.82 meters (6 feet) of the device.

•Visually inspect the power cord and see that it is secured to the AC power connector.

•Make sure that there is proper heat dissipation from and adequate ventilation around the Switch. Do not place heavy objects on the Switch.

Desktop or Shelf Installation

When installing the Switch on a desktop or shelf, the rubber feet included with the device should first be attached. Attach these cushioning feet on the bottom at each corner of the device. Allow adequate space for ventilation between the device and the objects around it.

5

Image 15

D-Link DES-3226 manual Unpacking and Setup, Desktop or Shelf Installation

Contents

Recyclable Wichtige Sicherheitshinweise Trademarks Copyright StatementHardware Link Offices for Registration and Warranty Service FCC WarningCE Mark Warning Attenzione Vcci Warning Bsmi WarningPage Table of Contents Viii DhcpPage Page Overview of this User’s Guide About this GuidePorts FeaturesPerformance Features IntroductionManagement DES-3226 NWay Standalone Fast Ethernet Switch User’s Guide Unpacking Unpacking and SetupInstallation Desktop or Shelf InstallationInstalling rubber feet for desktop installation Rack InstallationPower Failure Power onIdentifying External Components Front PanelRear Panel Optional 100BASE and 1000BASE Extension Modules Side Panels100BASE-FL Module 15Km 100BASE-FX Module 2KmOptional 1000BASE-LX 2-port front panel module 1000BASE-LX Gigabit Module1000BASE-T Copper Gigabit Module 1000BASE-SX Gigabit Module1000BASE Gbic Module LED IndicatorsConnecting the Switch Switch to End NodeSwitch to Hub or Switch DES-3226 NWay Standalone Fast Ethernet Switch User’s Guide Switch Management and Operating Concepts Diagnostic console port RS-232 DCELocal Console Management IP Addresses and Snmp Community Names Boot Procedure screenTraps Authentication MIBsSnmp performs the following functions MAC Address Aging Time Some filtering is done automatically by the SwitchPacket Forwarding FilteringSTP Operation Levels Spanning Tree ProtocolBridge Protocol Data Units Variable Description Default ValueSTP Port States Creating a Stable STP TopologyPort transitions from one state to another as follows Default Spanning-Tree Configuration Feature Default ValueIllustration of STP User-Changeable STP ParametersBefore Applying the STA Rules VLANs Ieee 802.1Q VLANsSome relevant terms 802.1Q Vlan Packet Forwarding Ieee 802.1Q Packet Forwarding 802.1Q Vlan TagsIeee 802.1Q Tag Port Vlan IDIngress Filtering Tagging and UntaggingVID VLANsDhcp Typical 802.1X Configuration Prior to User Authentication 802.1X Port-based Network Access Control10. Typical 802.1X Configuration with User Authentication 11. Typical Configuration with 802.1X Fully Implemented Configuring the Switch Using the Console Interface Connecting to the SwitchBefore You Start Console Usage Conventions First Time Connecting to The SwitchMain menu User Accounts ManagementRoot, User+ and Normal User Privileges Switch Configuration Privilege Management Root User+User Accounts Management Save ChangesHighlight Reboot from the main menu and press Enter Factory ResetUpdating or Deleting User Accounts Logging Onto The Switch ConsoleDeleting a User Account Viewing Current User AccountsConfigure IP Address Configuration11. Remote Management Setup screen Configure Advanced Switch Features Configure Switch Information and Advanced Settings13. Configure Advanced Switch Features screen 14. Configure Ports screen Configure Ports15. Bandwidth Configuration menu Configure Bandwidth17. Setup Egress Bandwidth screen Configure Spanning Tree Protocol19. Port Spanning Tree Settings screen Port Spanning Tree SettingsSetup Unicast Filtering Table Configure Static Destination-Address Filtering Table21. Setup Unicast Filtering Table screen Setup Static Multicast Filtering TableTo create a new 802.1Q Vlan Configure VLANsTo set the 802.1Q Vlan membership status of a port 802.1Q Static Vlan SettingsPort Vlan assignment To set a port as either a Tagged or an Untagged portExample of 802.1Q Vlan 26. Port Vlan assignment screen Ingress Filter SettingsPort Gvrp Settings Configure Igmp SnoopingTo configure Igmp Snooping 29. Igmp Snooping Settings screen30. Port Lacp Trunking Settings screen Configure Port Lacp TrunkingGroup Name Enter a name for the port trunking group Configure Port MirroringConfigure Port Security Configure Threshold of Broadcast/Multicast/DA-Unknown Storm35. Class of Service Configuration screen Class of Service ConfigurationClass of Traffic Configuration Default Port Priority assignmentConfigure Diffserv Settings Configure Port Gmrp SettingsPAE System Configuration Configure Port Access Entity41. PAE System Configuration menu 43. Initialize Ports screen 44. Reauthenticate Portss menu Configure 802.1X Authenticator Configuration45. Configure 802.1X Authenticator Configuration screen 46. Configure Radius Server menu Configure Radius Server48. Configure Authentic Radius Server screen Port Utilization Network MonitoringPort Packet Analysis Port Error PacketsTo search for a particular MAC address Browse MAC AddressIgmp Snooping Switch HistoryVlan Status Dynamic Group Registration Table59. Monitor Authentication Statistics screen Port Access Control Statistics61. Show Authenticator Statistics screen 62. Show Authenticator Session-Counters screen 64. Show Radius Accounting screen Snmp Manager Configuration65. Snmp Manager Configuration screen System Utilities Upgrade Firmware from Tftp ServerSave Settings to Tftp Server Use Configuration File on Tftp ServerPing Test Save History Log to Tftp Server71. Ping screen Reboot73. System Reboot confirmation screen WEB-BASED Network Management IntroductionGetting Started DES-3226 NWay Standalone Fast Ethernet Switch User’s Guide IP Address TCP/IP Parameters Setup windowSwitch Information Basic Settings window Switch InformationSwitch Information Advanced Settings window Advanced SettingsDES-3226 NWay Standalone Fast Ethernet Switch User’s Guide Port Configuration window Port ConfigurationPort Mirroring window Port MirroringPort Lacp Trunking Port Lacp Trunking Settings windowIgmp Snooping Settings window DES-3226 NWay Standalone Fast Ethernet Switch User’s Guide 100 Port Gmrp101 Diffserv SettingsSTP Switch Settings Spanning Tree102 103 STP Port SettingsStatic Filtering Table Unicast Filtering104 Multicast Filtering Static Vlan Entry105 106 15 .1Q Static Vlan Setup window107 Port Vlan ID PvidPort Bandwidth Ingress Bandwidth108 Threshold of Broadcast Egress Bandwidth109 110 Port PriorityClass of Service Class of Traffic111 Port Security PAE System Control112 113 Configure Authenticator114 115 Port Authenticating SettingsReauthenticate Portss Initialize Portss116 Radius Server General Radius Server117 118 Authentic Radius Server119 ManagementSecurity IP Local UserSnmp Manager Trap Manager120 121 User AccountsUser Account Management User Account Modify Table122 MonitoringPackets Received RX123 124 38. Rx Packets Analysis window Table125 UMB-cast RX126 Transmitted TX127 Errors128 43. Rx Error Analysis window Line Chart129 130 45. Tx Error Analysis window Line Chart131 Size132 Packet Size133 MAC Address134 49. MAC Address Table window135 Dynamic Group Registration136 Port Access Control137 Authenticator State138 Authenticator Statistics139 Authenticator Session-Counter140 Radius Authentication141 MaintenanceTftp Services Radius AccountingUpdate Firmware Configuration File142 Save Settings Save History Log143 144 62. Switch History window145 Save Changes146 Restart System147 Connection TimeoutHelp Logout148 Technical Specifications149 Physical and Environmental150 RJ-45 PIN Specification151 RJ-45 Connector pin assignment152 Runtime Switching Software Default Settings153 Understanding Troubleshooting the Spanning Tree ProtocolBlocking State Port in the blocking state does the followingListening State Port in the listening state does the following154 Learning State Port in the learning state does the following155 156 Disabled StateForwarding State Port in the forwarding state does the following157 Disabled port does the following158 Troubleshooting STPSpanning Tree Protocol Failure Full/Half Duplex Mismatch159 Unidirectional LinkIdentifying a Data Loop Resource ErrorsKnow where the root is located Packet CorruptionKnow which links are redundant Minimize the number of ports in the blocking state161 162 163 Brief Review of Bitwise Logical Operations164 Index165 NV-RAMOffices Netherlands Link Benelux Registration Card