D-Link DES-3226 manual Configure Authentic Radius Server screen

DES-3226 NWay Standalone Fast Ethernet Switch User’s Guide

•Radius Time Out:[10 ] – This specifies the number of seconds NAS waits for a reply to a RADIUS request before transmitting the request.

•Radius Maximum Retransmit:[2 ] –This specifies the number of times NAS transmits each RADIUS request to the server before giving up.

•Accounting Method:<Radius Server> – To use a RADIUS Server, toggle from None to Radius Server.

•Accounting Mode:<Start and Stop> – Select the desired method: Start and Stop, Stop only, or None.

Figure 6-48. Configure Authentic Radius Server screen

This screen allows you to set the following features:

•Succession: <First> – Choose the desired RADIUS server to configure: First, Second or Third.

•Radius Server: [0.0.0.0] – Set the RADIUS server IP.

•Authentic Port:[ 1813 ] – Set the RADIUS authentic server(s) UDP port. The default value is 1813.

•Accounting Port:[ 1813 ] – Set the RADIUS account server(s) UDP port. The default value is 1813.

•Key – Set the key the same as that of the RADIUS server.

•Confirm Key – Confirm the shared key is the same as that of the RADIUS server.

•Status:<Invalid> –This allows you to set the RADIUS server as Valid or Invalid.

73