Save Settings, Save History Log, 143 | D-Link DES-3226 specs

DES-3226 NWay Standalone Fast Ethernet Switch User’s Guide

Note: Configuration files used in the earlier version of this switch (firmware version 1.0) are not supported by the present version (firmware version 2.0). The Switch Information window displays the firmware version.

Save Settings

The Switch’s current settings can be uploaded to a TFTP Server by the Switch’s management agent.

Figure 7-60. Save Settings To TFTP Server window

Enter the IP address of the TFTP Server in the Server IP Address field and the complete path and file name of the firmware file for the Switch. Click Apply to enter the server’s IP address into the Switch’s RAM (use Save Changes to enter the address into the Switch’s non-volatile RAM). Click Start to initiate the file transfer.

Please note that if the user does not save configurations to NV-RAM, the configurations the user is uploading to a TFTP server will not be saved correctly.

The information is described as follows:

•Server IP Address – The IP address of the TFTP server.

•File Name – The full file name (including path) of the new firmware file on the TFTP server.

Save History Log

The Switch’s management agent can upload its history log file to a TFTP server.

Please note that an empty history file on the TFTP server must exist on the server before the Switch can upload its history file.

Figure 7-61. Save Switch History To TFTP Server window

Enter the IP address of the TFTP Server in the Server IP Address field and the complete path and file name of the firmware file for the Switch. Click Apply to enter the server’s IP address into the Switch’s RAM (use Save Changes to enter the address into the Switch’s non-volatile RAM). Click Start to initiate the file transfer.

The information is described as follows:

143

Image 153

D-Link DES-3226 manual Save Settings, Save History Log, 143

Contents

Recyclable Wichtige Sicherheitshinweise Trademarks Copyright StatementHardware Link Offices for Registration and Warranty Service FCC WarningCE Mark Warning Attenzione Vcci Warning Bsmi WarningPage Table of Contents Viii DhcpPage Page Overview of this User’s Guide About this Guide Performance Features FeaturesIntroduction Ports Management DES-3226 NWay Standalone Fast Ethernet Switch User’s Guide Installation Unpacking and SetupDesktop or Shelf Installation Unpacking Installing rubber feet for desktop installation Rack Installation Power Failure Power on Identifying External Components Front PanelRear Panel Optional 100BASE and 1000BASE Extension Modules Side Panels 100BASE-FL Module 15Km 100BASE-FX Module 2Km Optional 1000BASE-LX 2-port front panel module 1000BASE-LX Gigabit Module 1000BASE-T Copper Gigabit Module 1000BASE-SX Gigabit Module 1000BASE Gbic Module LED Indicators Connecting the Switch Switch to End NodeSwitch to Hub or Switch DES-3226 NWay Standalone Fast Ethernet Switch User’s Guide Switch Management and Operating Concepts Diagnostic console port RS-232 DCELocal Console Management IP Addresses and Snmp Community Names Boot Procedure screen Traps Authentication MIBsSnmp performs the following functions Packet Forwarding Some filtering is done automatically by the SwitchFiltering MAC Address Aging Time STP Operation Levels Spanning Tree Protocol Bridge Protocol Data Units Variable Description Default Value STP Port States Creating a Stable STP Topology Port transitions from one state to another as follows Default Spanning-Tree Configuration Feature Default Value Illustration of STP User-Changeable STP Parameters Before Applying the STA Rules VLANs Ieee 802.1Q VLANsSome relevant terms 802.1Q Vlan Packet Forwarding Ieee 802.1Q Packet Forwarding 802.1Q Vlan Tags Ieee 802.1Q Tag Port Vlan ID Ingress Filtering Tagging and Untagging VID VLANs Dhcp Typical 802.1X Configuration Prior to User Authentication 802.1X Port-based Network Access Control 10. Typical 802.1X Configuration with User Authentication 11. Typical Configuration with 802.1X Fully Implemented Configuring the Switch Using the Console Interface Connecting to the SwitchBefore You Start Console Usage Conventions First Time Connecting to The Switch Main menu User Accounts Management Root, User+ and Normal User Privileges Switch Configuration Privilege Management Root User+ User Accounts Management Save Changes Highlight Reboot from the main menu and press Enter Factory Reset Updating or Deleting User Accounts Logging Onto The Switch Console Deleting a User Account Viewing Current User Accounts Configure IP Address Configuration 11. Remote Management Setup screen Configure Advanced Switch Features Configure Switch Information and Advanced Settings 13. Configure Advanced Switch Features screen 14. Configure Ports screen Configure Ports 15. Bandwidth Configuration menu Configure Bandwidth 17. Setup Egress Bandwidth screen Configure Spanning Tree Protocol 19. Port Spanning Tree Settings screen Port Spanning Tree Settings Setup Unicast Filtering Table Configure Static Destination-Address Filtering Table 21. Setup Unicast Filtering Table screen Setup Static Multicast Filtering Table To create a new 802.1Q Vlan Configure VLANs To set the 802.1Q Vlan membership status of a port 802.1Q Static Vlan Settings Port Vlan assignment To set a port as either a Tagged or an Untagged portExample of 802.1Q Vlan 26. Port Vlan assignment screen Ingress Filter Settings Port Gvrp Settings Configure Igmp Snooping To configure Igmp Snooping 29. Igmp Snooping Settings screen 30. Port Lacp Trunking Settings screen Configure Port Lacp Trunking Group Name Enter a name for the port trunking group Configure Port Mirroring Configure Port Security Configure Threshold of Broadcast/Multicast/DA-Unknown Storm 35. Class of Service Configuration screen Class of Service Configuration Class of Traffic Configuration Default Port Priority assignment Configure Diffserv Settings Configure Port Gmrp Settings PAE System Configuration Configure Port Access Entity 41. PAE System Configuration menu 43. Initialize Ports screen 44. Reauthenticate Portss menu Configure 802.1X Authenticator Configuration 45. Configure 802.1X Authenticator Configuration screen 46. Configure Radius Server menu Configure Radius Server 48. Configure Authentic Radius Server screen Port Utilization Network Monitoring Port Packet Analysis Port Error Packets To search for a particular MAC address Browse MAC Address Igmp Snooping Switch History Vlan Status Dynamic Group Registration Table 59. Monitor Authentication Statistics screen Port Access Control Statistics 61. Show Authenticator Statistics screen 62. Show Authenticator Session-Counters screen 64. Show Radius Accounting screen Snmp Manager Configuration 65. Snmp Manager Configuration screen System Utilities Upgrade Firmware from Tftp Server Save Settings to Tftp Server Use Configuration File on Tftp Server Ping Test Save History Log to Tftp Server 71. Ping screen Reboot 73. System Reboot confirmation screen WEB-BASED Network Management IntroductionGetting Started DES-3226 NWay Standalone Fast Ethernet Switch User’s Guide IP Address TCP/IP Parameters Setup window Switch Information Basic Settings window Switch Information Switch Information Advanced Settings window Advanced Settings DES-3226 NWay Standalone Fast Ethernet Switch User’s Guide Port Configuration window Port Configuration Port Mirroring window Port Mirroring Port Lacp Trunking Port Lacp Trunking Settings window Igmp Snooping Settings window DES-3226 NWay Standalone Fast Ethernet Switch User’s Guide 100 Port Gmrp 101 Diffserv Settings STP Switch Settings Spanning Tree102 103 STP Port Settings Static Filtering Table Unicast Filtering104 Multicast Filtering Static Vlan Entry105 106 15 .1Q Static Vlan Setup window 107 Port Vlan ID Pvid Port Bandwidth Ingress Bandwidth108 Threshold of Broadcast Egress Bandwidth109 110 Port Priority Class of Service Class of Traffic111 Port Security PAE System Control112 113 Configure Authenticator 114 115 Port Authenticating Settings Reauthenticate Portss Initialize Portss116 Radius Server General Radius Server117 118 Authentic Radius Server Security IP ManagementLocal User 119 Snmp Manager Trap Manager120 User Account Management User AccountsUser Account Modify Table 121 122 Monitoring Packets Received RX123 124 38. Rx Packets Analysis window Table 125 UMB-cast RX 126 Transmitted TX 127 Errors 128 43. Rx Error Analysis window Line Chart 129 130 45. Tx Error Analysis window Line Chart 131 Size 132 Packet Size 133 MAC Address 134 49. MAC Address Table window 135 Dynamic Group Registration 136 Port Access Control 137 Authenticator State 138 Authenticator Statistics 139 Authenticator Session-Counter 140 Radius Authentication Tftp Services MaintenanceRadius Accounting 141 Update Firmware Configuration File142 Save Settings Save History Log143 144 62. Switch History window 145 Save Changes 146 Restart System Help Connection TimeoutLogout 147 148 Technical Specifications 149 Physical and Environmental 150 RJ-45 PIN Specification 151 RJ-45 Connector pin assignment 152 Runtime Switching Software Default Settings Blocking State Understanding Troubleshooting the Spanning Tree ProtocolPort in the blocking state does the following 153 Listening State Port in the listening state does the following154 Learning State Port in the learning state does the following155 Forwarding State Disabled StatePort in the forwarding state does the following 156 157 Disabled port does the following Spanning Tree Protocol Failure Troubleshooting STPFull/Half Duplex Mismatch 158 159 Unidirectional Link Know where the root is located Resource ErrorsPacket Corruption Identifying a Data Loop Know which links are redundant Minimize the number of ports in the blocking state161 162 163 Brief Review of Bitwise Logical Operations 164 Index 165 NV-RAM Offices Netherlands Link Benelux Registration Card