Tagging and Untagging | 31 |
Ingress Filtering | 31 |
VLANs | 32 |
DHCP | 33 |
802.1X | 34 |
Configuring the Switch Using the Console Interface | 37 |
Before You Start | 37 |
Connecting to the Switch | 37 |
User Accounts Management | 39 |
Save Changes | 41 |
Factory Reset | 42 |
Configuration | 45 |
Configure IP Address | 45 |
Configure Switch Information and Advanced Settings | 47 |
Configure Ports | 49 |
Configure Bandwidth | 50 |
Configure Spanning Tree Protocol | 51 |
Configure Static | 53 |
Configure VLANs | 55 |
Configure IGMP Snooping | 59 |
Configure Port LACP Trunking | 61 |
Configure Port Mirroring | 62 |
Configure Threshold of | 63 |
Configure Port Security | 63 |
Configure Class of Service, Default Priority and Traffic Class | 64 |
Configure Port GMRP Settings | 66 |
Configure DIFFSERV Settings | 66 |
Configure Port Access Entity | 67 |
Network Monitoring | 74 |
Port Utilization | 74 |
Port Error Packets | 75 |
Port Packet Analysis | 75 |
Browse MAC Address | 76 |
Switch History | 77 |
IGMP Snooping | 77 |
Dynamic Group Registration Table | 78 |
VLAN Status | 78 |
Port Access Control Statistics | 79 |
SNMP Manager Configuration | 82 |
System Utilities | 84 |
Upgrade Firmware from TFTP Server | 84 |
Use Configuration File on TFTP Server | 85 |
Save Settings to TFTP Server | 85 |
Save History Log to TFTP Server | 86 |
Ping Test | 86 |
Reboot | 87 |
89 | |
Introduction | 89 |
Getting Started | 89 |
Configuration | 91 |
IP Address | 91 |
Switch Information | 92 |
Advanced Settings | 93 |
Port Configuration | 95 |
Port Mirroring | 96 |
viii |
|