Update Firmware, Configuration File, 142 | D-Link DES-3226 specification

DES-3226 NWay Standalone Fast Ethernet Switch User’s Guide

Switch, and switch settings can be saved to a TFTP server. In addition, the Switch’s history log can be uploaded from the Switch to a TFTP server.

Please note that TFTP server software must be running on the management station for the TFTP services listed here to work.

Update Firmware

Figure 7-58. Update Firmware from Server window

Enter the IP address of the TFTP Server in the Server IP Address field and the complete path and file name of the firmware file for the Switch. Click Apply to enter the server’s IP address into the Switch’s RAM (use Save Changes to enter the address into the Switch’s non-volatile RAM). Click Start to initiate the file transfer.

The information is described as follows:

•Server IP Address – The IP address of the TFTP server.

•File Name – The full file name (including path) of the new firmware file on the TFTP server.

Configuration File

A configuration file can be downloaded from a TFTP server to the Switch. This file is then used by the Switch to configure itself.

Figure 7-59. Use Configuration File on Server window

Enter the IP address of the TFTP Server in the Server IP Address field and the complete path and file name of the firmware file for the Switch. Click Apply to enter the server’s IP address into the Switch’s RAM (use Save Changes to enter the address into the Switch’s non-volatile RAM). Click Start to initiate the file transfer.

The information is described as follows:

•Server IP Address – The IP address of the TFTP server.

•File Name – The full file name (including path) of the new firmware file on the TFTP server.

142

Image 152

D-Link DES-3226 manual Update Firmware, Configuration File, 142

Contents

Recyclable Wichtige Sicherheitshinweise Hardware TrademarksCopyright Statement CE Mark Warning Link Offices for Registration and Warranty ServiceFCC Warning Vcci Warning Bsmi Warning AttenzionePage Table of Contents Dhcp ViiiPage Page About this Guide Overview of this User’s Guide Features Performance FeaturesIntroduction Ports Management DES-3226 NWay Standalone Fast Ethernet Switch User’s Guide Unpacking and Setup InstallationDesktop or Shelf Installation Unpacking Rack Installation Installing rubber feet for desktop installation Power on Power Failure Rear Panel Identifying External ComponentsFront Panel Side Panels Optional 100BASE and 1000BASE Extension Modules 100BASE-FX Module 2Km 100BASE-FL Module 15Km 1000BASE-LX Gigabit Module Optional 1000BASE-LX 2-port front panel module 1000BASE-SX Gigabit Module 1000BASE-T Copper Gigabit Module LED Indicators 1000BASE Gbic Module Switch to Hub or Switch Connecting the SwitchSwitch to End Node DES-3226 NWay Standalone Fast Ethernet Switch User’s Guide Local Console Management Switch Management and Operating ConceptsDiagnostic console port RS-232 DCE Boot Procedure screen IP Addresses and Snmp Community Names Traps Snmp performs the following functions AuthenticationMIBs Some filtering is done automatically by the Switch Packet ForwardingFiltering MAC Address Aging Time Spanning Tree Protocol STP Operation Levels Variable Description Default Value Bridge Protocol Data Units Creating a Stable STP Topology STP Port States Default Spanning-Tree Configuration Feature Default Value Port transitions from one state to another as follows User-Changeable STP Parameters Illustration of STP Before Applying the STA Rules Some relevant terms VLANsIeee 802.1Q VLANs 802.1Q Vlan Packet Forwarding 802.1Q Vlan Tags Ieee 802.1Q Packet Forwarding Port Vlan ID Ieee 802.1Q Tag Tagging and Untagging Ingress Filtering VLANs VID Dhcp 802.1X Port-based Network Access Control Typical 802.1X Configuration Prior to User Authentication 10. Typical 802.1X Configuration with User Authentication 11. Typical Configuration with 802.1X Fully Implemented Before You Start Configuring the Switch Using the Console InterfaceConnecting to the Switch First Time Connecting to The Switch Console Usage Conventions User Accounts Management Main menu Switch Configuration Privilege Management Root User+ Root, User+ and Normal User Privileges Save Changes User Accounts Management Factory Reset Highlight Reboot from the main menu and press Enter Logging Onto The Switch Console Updating or Deleting User Accounts Viewing Current User Accounts Deleting a User Account Configuration Configure IP Address 11. Remote Management Setup screen Configure Switch Information and Advanced Settings Configure Advanced Switch Features 13. Configure Advanced Switch Features screen Configure Ports 14. Configure Ports screen Configure Bandwidth 15. Bandwidth Configuration menu Configure Spanning Tree Protocol 17. Setup Egress Bandwidth screen Port Spanning Tree Settings 19. Port Spanning Tree Settings screen Configure Static Destination-Address Filtering Table Setup Unicast Filtering Table Setup Static Multicast Filtering Table 21. Setup Unicast Filtering Table screen Configure VLANs To create a new 802.1Q Vlan 802.1Q Static Vlan Settings To set the 802.1Q Vlan membership status of a port Example of 802.1Q Vlan Port Vlan assignmentTo set a port as either a Tagged or an Untagged port Ingress Filter Settings 26. Port Vlan assignment screen Configure Igmp Snooping Port Gvrp Settings 29. Igmp Snooping Settings screen To configure Igmp Snooping Configure Port Lacp Trunking 30. Port Lacp Trunking Settings screen Configure Port Mirroring Group Name Enter a name for the port trunking group Configure Threshold of Broadcast/Multicast/DA-Unknown Storm Configure Port Security Class of Service Configuration 35. Class of Service Configuration screen Default Port Priority assignment Class of Traffic Configuration Configure Port Gmrp Settings Configure Diffserv Settings Configure Port Access Entity PAE System Configuration 41. PAE System Configuration menu 43. Initialize Ports screen Configure 802.1X Authenticator Configuration 44. Reauthenticate Portss menu 45. Configure 802.1X Authenticator Configuration screen Configure Radius Server 46. Configure Radius Server menu 48. Configure Authentic Radius Server screen Network Monitoring Port Utilization Port Error Packets Port Packet Analysis Browse MAC Address To search for a particular MAC address Switch History Igmp Snooping Dynamic Group Registration Table Vlan Status Port Access Control Statistics 59. Monitor Authentication Statistics screen 61. Show Authenticator Statistics screen 62. Show Authenticator Session-Counters screen Snmp Manager Configuration 64. Show Radius Accounting screen 65. Snmp Manager Configuration screen Upgrade Firmware from Tftp Server System Utilities Use Configuration File on Tftp Server Save Settings to Tftp Server Save History Log to Tftp Server Ping Test Reboot 71. Ping screen 73. System Reboot confirmation screen Getting Started WEB-BASED Network ManagementIntroduction DES-3226 NWay Standalone Fast Ethernet Switch User’s Guide TCP/IP Parameters Setup window IP Address Switch Information Switch Information Basic Settings window Advanced Settings Switch Information Advanced Settings window DES-3226 NWay Standalone Fast Ethernet Switch User’s Guide Port Configuration Port Configuration window Port Mirroring Port Mirroring window Port Lacp Trunking Settings window Port Lacp Trunking Igmp Snooping Settings window DES-3226 NWay Standalone Fast Ethernet Switch User’s Guide Port Gmrp 100 Diffserv Settings 101 102 STP Switch SettingsSpanning Tree STP Port Settings 103 104 Static Filtering TableUnicast Filtering 105 Multicast FilteringStatic Vlan Entry 15 .1Q Static Vlan Setup window 106 Port Vlan ID Pvid 107 108 Port BandwidthIngress Bandwidth 109 Threshold of BroadcastEgress Bandwidth Port Priority 110 111 Class of ServiceClass of Traffic 112 Port SecurityPAE System Control Configure Authenticator 113 114 Port Authenticating Settings 115 116 Reauthenticate PortssInitialize Portss 117 Radius ServerGeneral Radius Server Authentic Radius Server 118 Management Security IPLocal User 119 120 Snmp ManagerTrap Manager User Accounts User Account ManagementUser Account Modify Table 121 Monitoring 122 123 PacketsReceived RX 38. Rx Packets Analysis window Table 124 UMB-cast RX 125 Transmitted TX 126 Errors 127 43. Rx Error Analysis window Line Chart 128 129 45. Tx Error Analysis window Line Chart 130 Size 131 Packet Size 132 MAC Address 133 49. MAC Address Table window 134 Dynamic Group Registration 135 Port Access Control 136 Authenticator State 137 Authenticator Statistics 138 Authenticator Session-Counter 139 Radius Authentication 140 Maintenance Tftp ServicesRadius Accounting 141 142 Update FirmwareConfiguration File 143 Save SettingsSave History Log 62. Switch History window 144 Save Changes 145 Restart System 146 Connection Timeout HelpLogout 147 Technical Specifications 148 Physical and Environmental 149 RJ-45 PIN Specification 150 RJ-45 Connector pin assignment 151 Runtime Switching Software Default Settings 152 Understanding Troubleshooting the Spanning Tree Protocol Blocking StatePort in the blocking state does the following 153 154 Listening StatePort in the listening state does the following 155 Learning StatePort in the learning state does the following Disabled State Forwarding StatePort in the forwarding state does the following 156 Disabled port does the following 157 Troubleshooting STP Spanning Tree Protocol FailureFull/Half Duplex Mismatch 158 Unidirectional Link 159 Resource Errors Know where the root is locatedPacket Corruption Identifying a Data Loop 161 Know which links are redundantMinimize the number of ports in the blocking state 162 Brief Review of Bitwise Logical Operations 163 Index 164 NV-RAM 165 Offices Netherlands Link Benelux Registration Card