D-Link DES-3624 manual Sample Configuration File, Commands, Notes about the Configuration File

Stackable NWay Ethernet Switch User’s Guide

C

SAMPLE CONFIGURATION FILE

This appendix provides a sample configuration file that can be used with the Update Firmware and Configuration Files screen in the console program.

The configuration file is a simple text file that you create. It has two functions: to point to the location of a file on a TFTP server, and to set the IP address, subnet mask and default gateway for the Switch. The file being uploaded can be either new runtime switching software, or a switch settings file which was previously saved on the TFTP server using the Save Settings to TFTP Server screen on the System Utilities menu. The IP address settings defined in the configuration file will override all other IP settings, even those defined in the settings file being uploaded. This enables the settings from one switch to be uploaded to another switch without their IP settings being the same (and thus coming into conflict).

Commands:

♦Code_type – This command tells the Switch the type of file you wish to upload to the Switch. Possible Code_types are PROM, RUNTIME, or CONFIG. This should always be the first setting.

•PROM – PROM update file.

•RUNTIME – Switching software update file.

•CONFIG – Image file of switch settings created by the settings backup procedure.

♦Image_file – This command tells the switch the complete path and filename for the file to be loaded into the switch. For example, “e:\3624\3624prom.tfp”. Make sure double-quotes are used as in the example file below.

♦Ip_addr – This is the IP address that will be assigned to the switch. This command is included for downloading a configuration settings file to another switch. The IP address defined in this file will override the IP address in the configuration settings file, thus the switch you are downloading to can have a different IP address than the one that created the configuration settings file. An example of an IP address is: 10.12.19.102.

♦Subnet_mask – This is the subnet mask that will be assigned to the switch. An example of a subnet mask is: 255.128.0.0.

♦Default_gateway – This is the default gateway IP that will be assigned to the switch. An example of a default Gateway IP is: 10.254.254.253.

♦# – Remark. When placed as the first character on a line, the entire line will be ignored by the switch. This allows items to be labeled, or unused commands to remain in the file so that the syntax will not be forgotten.

Notes about the Configuration File:

This configuration file can only contain 4 settings: Code_type, Ip_addr, Subnet_mask and

Default_gateway.

154 Sample Configuration File