Datamax DGL manual Partially Supported Commands

Chapter 3

<STX>KO	GPIO Output
	PTX has its own GPIO configuration methods
<STX>KS	Configure Scalable Font Cache Size
	PTX Font cache is configured in PRINTER CONTROL Menu
<STX>P	Enter Character Dump Mode
	HexDump Mode is available in DIAGNOSTICS Menu
<STX>T	Printhead Dot Pattern Test Label
<STX>Z	Print Configuration and Dot Pattern Labels
	DIAGNOSTICS -> Printer Tests
<STX>J	Set Pause for each label
<STX>p	Controlled Pause
	These commands can be supported by using PAA to filter out the
	commands, and have GPIO put the printer in Single Label Mode.
	A panel-key can then be assigned by GPIO to either print the next
	label (for <STX>J), or disable pause mode again (for <STX>p).

Partially Supported Commands

<STX>t	Test DRAM Memory Module
<STX>w	Test FLASH Module
	This command tests the DRAM / Flash, and reports back to the
	host. DGL always reports ‘OK’ status.

44