STX KF - Select Factory Defaults
This command restores the printer’s configuration to the “factory default” settings. These factory default values may be either the Datamax default settings or the configuration file previously specified in the <STX>Kd command. (Not supported.)
STX Kf - Set Present Distance
This command specifies an additional amount to advance the label after printing. (Not supported.)
STX Kp - Module Protection
This command controls memory module protection. When “protected”, a module will ignore format, downloads and delete commands. This command can be useful to add data to Datamax reserved modules, Z (ILPC) and Y (EFIGS). (Not supported.)
STX KQ - Query Memory Configuration
This command causes the printer to transmit its internal DRAM memory configuration to the host device. The transmitted data provides information regarding the total amount of installed internal DRAM, the amount available for configuration and the amount currently assigned to specific functions or entities. (Reported values are not all actual values.)
STX Kq - Query Memory Configuration (new format)
This command causes the printer to transmit its internal DRAM memory configuration to the host device. The transmitted data provides information regarding the total amount of internal DRAM installed, the amount available for configuration, and the amount currently assigned to specific functions or entities. (Not supported.)
STX Kr - Resettable Counter Reset
This command resets the internal counters. Follow this command with an <SOH>U command to retain the reset or the counters will revert to the previous values after cycling power. (Not supported.)
STX KV - Verifier Enable/Disable
This command allows the verifier (option, if installed), to be enabled and disabled. (Not supported.)
STX Kx - Delete Configuration File
This command deletes the specified configuration file. (Not supported.)
29
