Dell 210 owner manual Notch Crossbar Memory module Cutouts

5Align the notch on the bottom of the module with the crossbar in the connector.

1

3

4

			2
1	notch	2	crossbar
3	memory module	4	cutouts (2)

NOTICE: To avoid damage to the memory module, press the module straight down into the connector while you apply equal force to each end of the module.

6Insert the module into the connector until the module snaps into position.

If you insert the module correctly, the securing clips snap into the cutouts at each end of the module.

7Replace the computer cover, (see "Replacing the Computer Cover" on page 96).

NOTICE: To connect a network cable, first plug the cable into the network device and then plug it into the computer.

8Connect your computer and devices to electrical outlets, and turn them on.

9Right-click the My Computer icon and click Properties.

10Click the General tab.

11To verify that the memory is installed correctly, check the amount of memory (RAM) listed.

Removing and Installing Parts

69