Dell 210 owner manual Power cable, Open bay

3Connect the power cable and hard-drive or SATA cable to the drive.

2

1

			3
			4
1	power cable	2	hard drive plastic latch
3	hard drive cable or serial ATA data cable	4	open bay

4Check all connectors to be certain that they are properly cabled and firmly seated.

5Gently slide the drive into the open bay until the hard drive plastic latch attaches to the hard drive holder on the chassis.

NOTE: The plastic latch fits into a small rectangular hole on the chassis. The rectangular hole is larger than the other small holes on the back of the chassis.

Removing and Installing Parts

79