If you are installing or replacing a PCI Express card, follow the procedures in the next section. If you are removing but not replacing a card, see "Removing a PCI Express Card" on page 74.
If you are replacing a card, remove the current driver for the card from the operating system.
Installing a PCI Express Card
1Follow the procedures in "Before You Begin" on page 61.
2Gently push the release tab on the card retention door from the inside to pivot the door open. Because the door is attached, it will remain in the open position.
1
1 | retention arm tab | 2 |
4 | card connector | 5 |
2 |
3
6 |
| 4 |
|
| |
5 |
|
|
PCI Express card | 3 | edge connector |
securing tab | 6 | securing slot |
3If you are installing a new card, remove the filler bracket to create a
4If you are replacing a card that is already installed in the computer, remove the card.
If necessary, disconnect any cables connected to the card. Grasp the card by its top corners, and ease it out of its connector.
Removing and Installing Parts
71
