5Prepare the card for installation.

See the documentation that came with the card for information on configuring the card, making internal connections, or otherwise customizing it for your computer.

CAUTION: Some network adapters automatically start the computer when they are connected to a network. To guard against electrical shock, be sure to unplug your computer from its electrical outlet before installing any cards.

6Place the card in the connector and press down firmly. Ensure that the card is fully seated in the slot.

7If you are installing the card into the x16 card connector, position the card so the securing slot is aligned with the securing tab, and gently pull the securing tab.

8Place the card in the connector and press down firmly. Ensure that the card is fully seated in the slot.

1

2

4

3

1

card not fully seated

2

bracket within slot

3

bracket caught outside of slot

4

card fully seated

9Before you close the card retention door, ensure that:

The tops of all cards and filler brackets are flush with the alignment bar.

The notch in the top of the card or filler bracket fits around the alignment guide.

72

Removing and Installing Parts

Page 72
Image 72
Dell 210 owner manual Removing and Installing Parts