Dell 2710 owner manual Replacing the Power-Button Assembly

55 Replacing the Power-Button Assembly

WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 11. After working inside your computer, follow the instructions in "After Working Inside Your Computer" on page 13. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/ regulatory_compliance.

Procedure

1Place the power-button assembly in the computer base and ensure that the power button fits in the slot on the computer base.

2Align the screw holes on the power-button assembly with the screws holes on the computer base and replace the screws that secure the power-button assembly to the computer base.

3Route the power-button cable through the routing guides and connect the power-button cable to the system board.

Postrequisites

1Replace the inner frame. See "Replacing the Inner Frame" on page 97.

2Replace the trim cover. See "Replacing the Trim Cover" on page 89.

3Replace the system-board shield. See "Replacing the System-Board Shield" on page 33.

4Replace the back cover. See "Replacing the Back Cover" on page 21.

Replacing the Power-Button Assembly 121