Dell 2710 owner manual Replacing the Inner Frame

43 Replacing the Inner Frame

WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 11. After working inside your computer, follow the instructions in "After Working Inside Your Computer" on page 13. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/ regulatory_compliance.

Procedure

1Align the screw holes on the inner frame with the screw holes on the computer base.

NOTE: Ensure that all cables are routed through their routing guides and no cables are placed between the inner frame and the computer base.

2Replace the screws that secure the inner frame to the computer base.

Postrequisites

1Replace the I/O panel. See "Replacing the I/O Panel" on page 93.

2Replace the trim cover. See "Replacing the Trim Cover" on page 89.

3Replace the system-board shield. See "Replacing the System-Board Shield" on page 33.

4Replace the stand. See "Replacing the Stand" on page 49.

5Replace the back cover. "Replacing the Back Cover" on page 21.

Replacing the Inner Frame 97