Removing the Hard-Drive Cage | 55
22 Removing the Hard-Drive Cage
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 11. After working inside your computer, follow the instructions in "After
Working Inside Your Computer" on page 13. For additional safety best practices
information, see the Regulatory Compliance Homepage at dell.com/
regulatory_compliance.
Prerequisites
1Remove the back cover. See "Removing the Back Cover" on page 19.
2Remove the stand. See "Removing the Stand" on page 47.
3Follow step 1 to step 2 in "Removing the Hard Drive" on page 51.
Procedure
1Remove the screws that secure the hard-drive cage to the computer base.
2Remove the power cables from the routing guides on the hard-drive cage.
3Lift the hard-drive cage off the computer base.
1 screws (4) 2 hard-drive cage
2
1
OM_Book.book Page 55 Friday, April 27, 2012 3:23 PM