Replacing the I/O Panel | 93
41 Replacing the I/O Panel
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 11. After working inside your computer, follow the instructions in "After
Working Inside Your Computer" on page 13. For additional safety best practices
information, see the Regulatory Compliance Homepage at dell.com/
regulatory_compliance.
Procedure
1Align the slots on the I/O panel with the ports on the I/O assembly.
2Press down on the I/O panel till it snaps into place.
Postrequisites
1Replace the trim cover. See "Replacing the Trim Cover" on page 89.
2Replace the stand. See "Replacing the Stand" on page 49.
3Replace the back cover. See "Replacing the Back Cover" on page 21.
OM_Book.book Page 93 Friday, April 27, 2012 3:23 PM