Replacing the Microphone Modules | 147
65 Replacing the Microphone Modules
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 11. After working inside your computer, follow the instructions in "After
Working Inside Your Computer" on page 13. For additional safety best practices
information, see the Regulatory Compliance Homepage at dell.com/
regulatory_compliance.
Procedure
1Align the microphone modules with the microphone-module socket and insert the
microphone modules into the microphone-module socket. Ensure that the
microphone modules are secured by the tabs on the microphone-module socket.
2Connect the microphone cables to the microphone modules.
Postrequisites
1Follow step 8 to step 19 in "Replacing the Display Panel" on page 139.
2Replace the inner frame. See "Replacing the Inner Frame" on page 97.
3Replace the processor heat-sink fan. See "Replacing the Processor Heat-Sink Fan"
on page 77.
4Replace the trim cover. See "Replacing the Trim Cover" on page 89.
5Replace the system-board shield. See "Replacing the System-Board Shield" on
page 33.
6Replace the stand. See "Replacing the Stand" on page 49.
7Replace the back cover. See "Replacing the Back Cover" on page 21.
OM_Book.book Page 147 Friday, April 27, 2012 3:23 PM