Removing the Converter Board | 23
6Removing the Converter Board
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 11. After working inside your computer, follow the instructions in "After
Working Inside Your Computer" on page 13. For additional safety best practices
information, see the Regulatory Compliance Homepage at dell.com/
regulatory_compliance.
Prerequisites
1Remove the back cover. See "Removing the Back Cover" on page 19.
Procedure
1Lift the securing tab on the display-backlight cable connector and then disconnect
the display-backlight cable from the convertor board.
2Disconnect the converter cable from the converter board.
3Remove the screws that secure the converter board to the computer base.
4Lift the converter board off the computer base.
1 screws (2) 2 converter cable
3 converter board 4 display-backlight cable
4
2
3
1
OM_Book.book Page 23 Friday, April 27, 2012 3:23 PM