Dell 2710 owner manual Replacing the Stand

19 Replacing the Stand

WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 11. After working inside your computer, follow the instructions in "After Working Inside Your Computer" on page 13. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/ regulatory_compliance.

Procedure

1Insert the tab at the top of the stand into the slot on the computer base.

2Align the screw holes on the stand with the screw holes on the hard-drive cage.

3Replace the screws that secure the stand to the hard-drive cage.

Postrequisites

1Replace the back cover. See "Replacing the Back Cover" on page 21.

Replacing the Stand 49