Removing the mSATA Mini-Card | 71
30 Removing the mSATA Mini-Card
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 11. After working inside your computer, follow the instructions in "After
Working Inside Your Computer" on page 13. For additional safety best practices
information, see the Regulatory Compliance Homepage at dell.com/
regulatory_compliance.
Prerequisites
1Remove the back cover. See "Removing the Back Cover" on page 19.
2Remove the system-board shield. See "Removing the System-Board Shield" on
page 31.
Procedure
1Remove the screws that secure the mSATA mini-card to the system board.
2Slide and remove the mSATA mini-card from the mSATA mini-card connector.
1 screws (2) 2 mSATA mini-card connector
3mSATA mini-card
12
3
OM_Book.book Page 71 Friday, April 27, 2012 3:23 PM