Removing the System-Board Shield | 31
10 Removing the System-Board Shield
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 11. After working inside your computer, follow the instructions in "After
Working Inside Your Computer" on page 13. For additional safety best practices
information, see the Regulatory Compliance Homepage at dell.com/
regulatory_compliance.
Prerequisites
1Remove the back cover. See "Removing the Back Cover" on page 19.
Procedure
1Remove the screws that secure the system-board shield to the computer base.
2Lift the system-board shield off the computer base.
1 screws (8) 2 system-board shield
OM_Book.book Page 31 Friday, April 27, 2012 3:23 PM