Dell 2710 owner manual Removing the Memory Modules

14 Removing the Memory Module(s)

WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 11. After working inside your computer, follow the instructions in "After Working Inside Your Computer" on page 13. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/ regulatory_compliance.

Prerequisites

1Remove the Back Cover. See "Removing the Back Cover" on page 19.

Procedure

1Remove the screw that secures the memory-module shield to the system-board shield.

2Slide the memory-module shield toward the bottom of the computer to remove it from the system-board shield.

1

2

3

1 memory-module shield 2 screw

3system-board shield

Removing the Memory Module(s) 39