Dell 2710 owner manual Replacing the Antenna Modules

69 Replacing the Antenna Module(s)

WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 11. After working inside your computer, follow the instructions in "After Working Inside Your Computer" on page 13. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/ regulatory_compliance.

Procedure

1Align the antenna modules with the alignment posts on the computer base and adhere the antenna modules to the computer base.

2Route the wireless-antenna cables through their routing guides and connect the wireless-antenna cables to the wireless mini-card.

Postrequisites

1Follow step 8 to step 19 in "Replacing the Display Panel" on page 139.

2Replace the inner frame. See "Replacing the Inner Frame" on page 97.

3Replace the processor heat-sink fan. See "Replacing the Processor Heat-Sink Fan" on page 77.

4Replace the trim cover. See "Replacing the Trim Cover" on page 89.

5Replace the system-board shield. See "Replacing the System-Board Shield" on page 33.

6Replace the stand. See "Replacing the Stand" on page 49.

7Replace the back cover. See "Replacing the Back Cover" on page 21.

Replacing the Antenna Module(s) 155