104 Removing and Installing Parts
3
Remove the two screws securing the cover, using a flat-blade screwdriver.
4
Release the computer cover by pulling it away from the front of the
computer and lifting it up.
5
Set the cover aside in a secure location.
Removing the Support Bracket CAUTION: Before you begin any of the procedures in this section, follow the
safety instructions in the Product Information Guide.
1
Follow the procedures in "Before You Begin" on page 101.
2
Remove the computer cover (see "Removing the Computer Cover" on
page 103).
3
Release the card retention bracket by lifting the card retention release lever up.
1computer cover 2screws (2)
1
2
book.book Page 104 Wednesday, April 16, 2008 3:33 PM