3
1
2
1 support bracket | 2 card retention bracket 3 card retention release lever |
Replacing the Computer Cover
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide.
1Ensure that all cables are connected, and fold cables out of the way.
2Ensure that no tools or extra parts are left inside the computer.
3Align the tabs at the bottom of the computer cover with the slots located along the edge of the computer.
4Press the computer cover down and slide it towards the front of the computer until you feel a click or feel the computer cover securely installed.
5Ensure that the cover is seated correctly.
6Replace and tighten the two screws that secure the computer cover, using a
