2
1 |
1 power supply | 2 screws (3) |
8Slide out the power supply and lift it out.
9Slide the replacement power supply toward the back of the computer.
2
1 |
1 power supply | 2 screws (3) |
10Replace and tighten all screws that secure the power supply to the back of the computer chassis.
CAUTION: Failure to replace and tighten all screws may cause electrical shock as these screws are a key part of the system grounding.
NOTICE: Route the DC power cables under the chassis tabs. The cables must be properly routed to prevent the cables from being damaged.
