1

2

3

1 bezel

2 insert lever

3 FlexBay drive insert

NOTE: To comply with FCC regulations, it is recommended that you replace the FlexBay drive insert whenever the floppy drive is removed from the computer.

Media Card Reader

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.

CAUTION: To guard against electrical shock, laceration by moving fan blades, or other unexpected injuries, always unplug your computer from the electrical outlet before opening the cover.

Removing a Media Card Reader

1Follow the procedures in "Before You Begin" on page 101.

2Remove the computer cover (see "Removing the Computer Cover" on page 103).

3Remove the bezel (see "Removing the Bezel" on page 123).

4Remove the CD or DVD drive (see "Removing a CD or DVD Drive" on page 142).

5Disconnect the FlexBay USB cable and the power cable from the back of the Media Card Reader and from the internal USB connector on the system board (see "System Board Components" on page 107).

6Press the two spring clamps and slide out the Media Card Reader along with the FlexBay drive cage from the FlexBay slot.

Removing and Installing Parts

137

Page 137
Image 137
Dell 531S owner manual Media Card Reader, 137