Dell 531S owner manual Replacing the Battery, 144

7Connect the power and data cables to the drive.

8Connect the data cable to the system board connector on the system board.

9Replace the bezel (see "Replacing the Bezel" on page 124).

10Replace the computer cover (see "Replacing the Computer Cover" on page 165).

NOTICE: To connect a network cable, first plug the cable into the network device and then plug it into the computer.

11Connect your computer and devices to their electrical outlets, and turn them on.

See the documentation that came with the drive for instructions on installing any software required for drive operation.

12Enter system setup (see "System Setup" on page 172) and select the appropriate Drive option.

13Verify that your computer works correctly by running the Dell Diagnostics (see "Dell Diagnostics" on page 84).

Battery

Replacing the Battery

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.

NOTICE: To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of your computer’s electronic components. You can do so by touching an unpainted metal surface on the computer chassis.

Acoin-cell battery maintains computer configuration, date, and time information. The battery can last several years. If you have to repeatedly reset time and date information after turning on the computer, replace the battery.

CAUTION: A new battery can explode if it is incorrectly installed. Replace the battery only with the same or equivalent type recommended by the manufacturer. Discard used batteries according to the manufacturer’s instructions.

144

Removing and Installing Parts