Instal l i ng System Board Opti ons 9-15
correct settings. See Chapter 3, “Using the System Setup Program,” for
instructions.
NOTE: If a CD-ROM drive or hard-disk drive in the upper 5.25-inch drive bay
obs tructs your access to the battery, you may fi nd it help ful to remove the front
bezel and slide the drive forward slightly to provide more room for you to work.
See the sections in Chapter 10 titled “Removing and Replacing the Front Bezel”
and “Installing a Drive in a 5.25-Inch Drive Bay” for instructions.
The battery is mounted in a socket labeled “BATTERY” at the upper front-right
corner of the system board (as you face the side of the system) (see Figure 9-1).
Pry the battery out of its socket with your fingers or with a blunt, nonconductive
object, such as a plastic screwdriver (see Figure 9-9).
BATTER Y socket
battery