
Choose the desired value and click OK. The value you selected is displayed under the resource heading in the Configuration Settings dialog box.
The Options button is disabled if no alternative values are available for the selected resource.
NOTE: If you change one or more resource values using the Options button and later change the setting in the Configuration Choice box, the changes that you made to the resource values are overwritten by the default values for the new
LVKHG&OLFNconfiguration2VHOHFWLQJ.WKHchoice&RQILJXUDWLQUHVRXUFHV. IRUWK6WWLQJVGLDORJHIXQFWLRQ ER[ZKHQ\RXKDYHILQ
NOTE: After modifying the system configuration, you must turn off the system to install, remove, or change jumper settings on the
$GGLQJDQ8QOLVWHG&DUG
Unlisted cards are
NOTE: If you want to add a configuration file that you received on diskette with a new expansion card, see “Adding a Listed Card” found earlier in this chapter.
To addFOLFNHG&OLFNPHQX)URPFKDSWHU6WUWan unlistedWKH$GGQDPH,&8LQcardDVZLQGRZVWHSRIGHVFULEHGwithWKHtheFFOLFNDWHJRU\OLFNICU,LQ2$.GGperform¥6WDWLQJRIRUFDUGVHOHFWtheWKDWWKHfollowing$GG,&8µ\RX&DUGIURPZDQWIRXQGsteps:WRHDUOLHULQDGGWKH&RQILJXUH,I\RXWKLV
A dialog box appears, listing the names of all available cards of that type.
Using the ISA Configuration Utility |