IS A Configuration Util ity Messages C-7
Found Plug and Play
ISA card:

Plug and Play

ISA Card Name

.
This message appears at
sy s tem start-up for each
Plug and Play ISA expan-
sion card recognized by
the Configuration
Manager.
Status message; no action is requir ed.
NOTICE: Boot Device
Not Active! CSN=

Card

Select Number

.
A boot device was found
to be inactive. Status message; no action is required. The
Config urat ion Mana ger auto ma tic al ly config -
ures and activates the device.
One or more active
devices have been
reconfigured -- sys-
tem requires reboot.
Press any key to
reboot system.
You modified the
resource values of one or
more PCI or Plug an d Pla y
ISA expans ion cards.
Reboot the system to reconfigure the card(s).
The Plug and Play ISA
card has been success-
fully configured.
Card Count Plug and
Play ISA cards have
been successfully
configured.
The Configuration Man-
ager has successfully
configured the given
number of card s.
If this message does not match the number
of Plug and Play ISA expansion cards installed
in your computer, reinstall any Plug and Play
expansion cards not listed and reboot the
system.
ERROR: Insufficient CM
Memory There is not enough
memory available to th e
Configuration Manager
for it to run.
Disable any TSR programs or any unneeded
device drivers.
ERROR: Fatal BIOS
error Internal Error
Code.
A BIOS call failed with an
internal error. The most
likely cause is an incom-
patibility between the
BIOS and the Configura-
tion Manager.
See the chapter titled “Getting Help” in your

Diagnostics and Trouble shooting Guide

for
instructions on obtai ni ng te chnical assistance .
ERROR: Could not read
NVS, Error=

Internal

Error Code

.
An attempt to read the
NVRAM failed. See the chapter titled “Getting Help” in your

Diagnostics and Trouble shooting Guide

for
instructions o n obtaining techni ca l as sistance .
NOTE: F or the full name of an abbreviation or acronym used in this table, see the Glossary.