Dell 610 manual Selected card is, ICU has successfully To accept these settings, save the con

7DEOH0HVVDJH&￿￿￿&RQILJXUDWLRQ8WLOLW\3UREDEOH0HVVDJHV&DXVH￿FRQWLQXHG￿ &RUUHFWLYH$FWLRQ

This device is unconfig- urable because of a resource conflict with card card_name. The con- flicting resource is resource_name. To fix, reconfigure the conflicting card.

The selected card is	Perform￿￿0DNHDQGUHVRXUFH)ROORZWKHLI\LQJ&DUGµDQGtheFKDQJHWKHfollowingQRWHW\S￿SURFHGXUHWKHRILQprocedure:WKHFRQIOLFWLQJYDOXH&KDSWHUFDUGIR¥QDPH0RG￿￿￿
unconfigurable because
one of its resources is
already being used by
another device.

resource_name XVHGE\ card_name￿

The ICU has successfully	The ICU has successfully	To accept these settings, save the con-
configured all Plug and	configured all of the Plug	figuration information into NVRAM by
Play cards in your sys-	and Play expansion cards	selecting Exit from the File menu and
tem. For the new configu-	that were not configured by	then selecting Yes to save. You must
ration to take effect,	the Configuration Manager.	reboot your system for these settings
save the configuration,
		to take effect.
then reboot your system.
The loaded card is not a	The category you have	Select OK. The ICU automatically opens
category card. Press OK	chosen is not the correct	the correct category’s dialog box.
to proceed.	category under which to	Continue the procedure for adding the
	add this card.	card as described in “Adding a Listed
		Card” or “Adding an Unlisted Card” in
		Chapter 4.

No more DMA values can be added.

No more interrupt values can be added.

No more memory values can be added.

No more I/O port values can be added.

No more values are avail- able for the resource you are trying to add or modify.

The maximum number of values for each resource is as follows:

‡4 DMA channels

‡7 IRQ lines

‡9 memory address blocks

‡20 I/O ports

To free values for the resource you are trying to add or modify, delete some of the values listed in the resource box for the card. If your card requires all of the values listed, contact your card manu- facturer to resolve the issue.

NOTE: For the full name of an abbreviation or acronym used in this table, see the Glossary.

ISA Configuration Utility Messages C-3