filler bracket

card

edge connector

card connector

retention arm

lever

7If you are installing a new card, remove the filler bracket to create a card-slot opening. Then continue with step 9.

8If you are replacing a card that is already installed in the computer, remove the card.

If necessary, disconnect any cables connected to the card. Grasp the card by its top corners, and ease it out of its connector.

9Prepare the card for installation.

See the documentation that came with the card for information on configuring the card, making internal connections, or otherwise customizing it for your computer.

CAUTION: Some network adapters automatically start the computer when they are connected to a network. To guard against electrical shock, be sure to unplug your computer from its electrical outlet before installing any cards. Verify that the standby power light on the system board is off.

Adding Parts

89

Page 89
Image 89
Dell K0004, DHM manual Card, Retention arm Lever