memory connectors on system board

securing clips (2)

notches (2)

memory module connector

cutouts (2)

step 5

step 6

step 7

6Align the notches on the bottom of the module with the crossbar in the connector.

NOTICE: To avoid damage to the memory module, press the module straight down into the socket with equal force applied at each end of the module.

7Insert the module straight down into the connector, ensuring that it fits into the vertical guides at each end of the connector. Press firmly on the ends of the module until it snaps into place.

If you insert the module correctly, the securing clips snap into the cutouts at each end of the module.

8Close the computer cover (see page 107).

NOTICE: To connect a network cable, first plug the cable into the network wall jack and then plug it into the computer.

9Connect your computer and devices to electrical outlets, and turn them on.

10Right-click the My Computer icon and then click Properties.

11Click the General tab.

Adding Parts

97

Page 97
Image 97
Dell K0004, DHM manual Securing clips Notches, Cutouts Step