96 Adding Parts
www.dell.com | support.dell.com
4Open the computer cover (see page84).
5Press out the securing clip at each end of the memory module
connector.
6Grasp the module and pull up.
If the module is difficult to remove, gently ease the module back and
forth to remove it from the connector.
Adding a Memory Module
1Shut down the computer (see page 33).
NOTICE: To disconnect a network cable, first unplug the cable from your
computer and then unplug it from the network wall jack.
2Turn off any attached devices and disconnect them from their
electrical outlets.
3Disconnect the computer power cable from the wall outlet, and then
press the power button to ground the system board.
4Open the computer cover (see page84).
5Press out the securing clip at each end of the memory module
connector.