retention arm

alignment guide alignment bar

filler bracket

NOTICE: Do not route card cables over or behind the cards. Cables routed over the cards can prevent the computer cover from closing properly or cause damage to the equipment.

12Connect any cables that should be attached to the card.

See the documentation for the card for information about the card’s cable connections.

NOTICE: To connect a network cable, first plug the cable into the network wall jack and then plug it into the computer.

13Close the computer cover (see page 107), reconnect the computer and devices to electrical outlets, and turn them on.

14Install any drivers required for the card as described in the card documentation.

Adding Parts

91

Page 91
Image 91
Dell K0004, DHM manual Retention arm, Filler bracket