w w w . d e l l . c o m s u p p o r t . d e l l . c o m

10Place the card in the connector and press down firmly. Ensure that the card is fully seated in the slot.

If the card is full-length, insert the end of the card into the card guide bracket as you lower the card toward its connector on the system board. Insert the card firmly into the card connector on the system board.

not fully seated card

fully seated card

bracket caught outside of slot

bracket within slot

11Before you lower the retention arm, ensure that:

The tops of all cards and filler brackets are flush with the alignment bar

The notch in the top of the card or filler bracket fits around the alignment guide

Press the arm into place, securing the card(s) in the computer.

90

Adding Parts

Page 90
Image 90
Dell DHM, K0004 manual Not fully seated card Fully seated card