5Remove the insert from the insert frame by pressing on the four tabs.

insert frame for floppy-drive bay

6Reattach the empty insert frame over the front of the drive bay. The insert frame fits only one way.

Installing a Floppy Drive

1Gently slide the drive into place until the tabs securely click into position.

2Attach the floppy-drive cable to the floppy drive and to the system board floppy-drive connector.

Ensure that you route the floppy-drive cable through the cable restraint located on the side of the floppy-drive bay.

3Attach the floppy-drive power cable to the floppy drive.

Adding Parts

105

Page 105
Image 105
Dell K0004, DHM manual Installing a Floppy Drive, 105