Note – The warning messages concerning lomp, lomv, and lom driver attachment seen during the installation of the SUWNlomr package can be safely ignored since the SUNWlomr package is not used on the Netra 1290 server. However, the presence of the package is required to enable successful upgrade through future patches.

To Install the LOM Utility

As superuser, type:

CODE EXAMPLE 2-3Installing the LOM Utility

#pkgadd -d . SUNWlomu

Processing package instance <SUNWlomu> from </export/lom>

LOMlite Utilities (usr)

(sparc) 2.0,REV=2000.08.22.14.14

Copyright 2000 Sun Microsystems, Inc. All rights reserved. Using </> as the package base directory.

##Processing package information.

##Processing system information.

4 package pathnames are already properly installed.

##Verifying package dependencies.

##Verifying disk space requirements.

##Checking for conflicts with packages already installed.

##Checking for setuid/setgid programs.

Installing LOMlite Utilities (usr) as <SUNWlomu>

##Installing part 1 of 1. 2333 blocks

Installation of <SUNWlomu> was successful.

To Install the LOM Manual Pages

As superuser, type:

50 Netra 1290 Server Installation Guide • May 2006

Page 62
Image 62
Sun Microsystems 1290 manual To Install the LOM Utility, To Install the LOM Manual Pages