PCI+ 0-5 slots

10/100BASE-T LOM/SC port

LOM Serial A port

Serial B port

FIGURE A-1External I/O Connection Locations

SCSI port, 68 pins

Alarms port

NET0 and NET1 ports

PCI+ IB_SSC Assemblies

Note – Do not mix different cards with different speeds within an IB6 leaf (two paired slots), because leaf slots run at the lowest speed and the lowest mode for a given set of cards within a leaf. For example, if a 33 MHz PCI card is in slot 0 and a 66 MHz PCI card is in slot 1, then both slots on the leaf will run in the lower 33 MHz PCI mode. IB6 leafs are comprised of paired slots 0 and 1, 2 and 3, and 4 and 5. In addition, all slots will only run in PCI+ mode.

PCI+ IB_SSC assemblies provide six PCI+ slots labeled 0 through 5. When viewing the rear of the server, slot 0 is on the left and slot 5 is on the right. All six slots support up to 66 MHz. The PCI+ slots are not hot-swappable, all slots are half length and 5V signaling is not supported.

54 Netra 1290 Server Installation Guide • May 2006

Page 66
Image 66
Sun Microsystems 1290 manual PCI+ Ibssc Assemblies, Figure A-1External I/O Connection Locations