This section is divided into the following:

“Adjusting the Slide Rail Assembly” on page 5

“To Install the Inner Rails on the Server” on page 6

“To Prepare the Rails for 2-Post Installations” on page 8

“Installing the Slide Rail Assemblies in a Sun Fire or Sun StorEdge Cabinet” on page 9

“Installing the Slide Rail Assemblies in a Sun Rack 900 Cabinet” on page 11

“Installing the Slide Rail Assemblies in a 19-Inch 4-Post Cabinet” on page 13

“Installing the Slide Rail Assemblies in a 19-Inch 2-Post Rack” on page 14

Adjusting the Slide Rail Assembly

Each slide rail assembly consists of four components (FIGURE 1-3):

Rear bracket that attaches to the assembly

Adjustable bracket that attaches to the rear bracket (adjustable bracket is not used in some configurations)

Slide rail assembly (with inner and outer rails)

Front bracket

Rear

bracket

Adjustable

2-Post 3" Position

bracket

2-Post 4" Position

Cabinet Sunfire

2-Post 6" Position

Cabinet NGR

Cabinet Storedge

Slide rail assembly

Front bracket

S U N F I R E

FIGURE 1-3Slide Rail Assembly (Standard Configuration)

Chapter 1 Unpacking and Installing the Server 5

Page 17
Image 17
Sun Microsystems 1290 manual Adjusting the Slide Rail Assembly, N F I R E